The type of panel or No Panel for a single PCB. You could choose single piece to delivery. Or you choose "Panel by KingCredie": Boards be made panel format by our factory. Or you choose "Panel by Customer": Customer supplied panel format and requirements.

A finished board include many different designed pcb quantity. If there are more than two or more pcb designs in panel, then price will be increased.

Please fill the dimension of pcb.

Panelization configuration of individual PCBs to be tab routed or scored.

Please choose whether you could allow have X-out boards on panel boards. If not allow X-out boards, unit price will be changed.

Panel Requirements.

The number of boards/panels required.  Note! If you choose "Panel by Customer", then this is the number of panels.

Different types of laminate available for PCB fabrication.

The number of conductive layers.

The total thickness of the board including all plating and final finishes, Thickness tolerance is +/-10% and not less +/-0.1mm. Attention! That we may charge additional fees if you specify a laminated structure.

Number of ounces of copper per square foot on outer layers.  Specify this as "finished" copper weight.

Inner layer copper weight. Because inner layers do not receive additional plating like outer layers, they start and finish with the same copper weight.

Minimum trace width and spacing between copper features. Whichever is least. The copper thickness you select will determine how narrow a trace or space can be manufactured.

The diameter of the smallest finished hole on your board.   

The color of the solder mask applied onto the PCB. Green solder mask has the best performance.

Silkscreen Color.    

It is the plating that will be applied to all outer layer copper features that are exposed in the solder mask.

● FL HASL& Lead HASL: ≥ 100 microinches

● ENIG(Immersion Gold): Gold:1-3 microinches, Nickel: >=100 microinches

● Immersion Silver: 6-15 microinches

● Immersion Tin: 30-47 microinches

● OSP(Organic Surface Protectant): 4-12microinches

● Bare Copper:  No plating finishes        

● The price of gold board will be affected by the area of gold, and the final price may changed.

What is the main reference for us to handle vias? 

● For *.PCB or *.PCBDOC files, it is difficult to confirm the via attribute, so we will handle via according to the option you choose.

● For gerber file, we will process it according to your gerber file. The four options you choose will be ignored. 

PCB test method, we will charge flying probe test cost every time when you are repeat ordering this job.  For fixture test, it is one time charge only.

Fill in any  details to make it as clear as possible for us to understand your requirements.